EMC-schermklemmen voor 35 mm DIN-rail vorm H, steekbaar
met of zonder geïntegreerde trekontlasting
Voor aanvragen uit België klik hier »
EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.
When using types with integrated strain relief cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved. We also offer EMC shield clamps with double strain relief function acc. to PROFINET installation guidelines.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm cable shield: width 26.25 mm).
The staggered arrangement of the extremely slim shield clamp SFS|SKL maximises space utilisation. Suitable for applications that require EMC shielding close to connection points or controller inputs.
The shield clamps can be easily attached by snapping them onto 35 mm DIN rails.
Art.nr.
37620.150
Specificaties
Eigenschappen
trillingsbestendig
Voordelen
Gedeeltelijk met geïntegreerde trekontlasting
Groot contactoppervlak
Afschermingscontact en trekontlasting gescheiden
Eenvoudige assemblage zonder gereedschap
Het veerontwerp vereist geen aanpassingen en houdt permanent contact met de kabelafscherming
Ontworpen voor toepassingen met hoge dichtheid
Schok- en trillingsbestendig, onderhoudsvrij
Geïntegreerde dubbele trekontlastingsfunctie conform de PROFINET-installatierichtlijnen
Voor aanvragen uit België klik hier »
EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.
When using types with integrated strain relief cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved. We also offer EMC shield clamps with double strain relief function acc. to PROFINET installation guidelines.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm cable shield: width 26.25 mm).
The staggered arrangement of the extremely slim shield clamp SFS|SKL maximises space utilisation. Suitable for applications that require EMC shielding close to connection points or controller inputs.
The shield clamps can be easily attached by snapping them onto 35 mm DIN rails.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
