KVT-ER | Deelbare kabelwartel

voor kabels met connectoren, M25 - M63 / IP66 / IP68 / UL Type 12 / 4X*

Bestel direct online @ CC Nederland »

Voor aanvragen uit België klik hier »

KVT-ER are split cable glands for routing and sealing cables with connectors, with diameters from 1 to 16 mm (KT 1 - 15) and 13 to 35 mm (KTG 13 - KT 34). But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery), sealed and strain relieved acc. to EN 62444.

The KVT-ER sizes are based on metric standard cut-outs M25, M32, M50 and M63. Hexagonal locknuts are included in the shipment. For assembly, we recommend to tighten the cover lid screws with max. 2 Nm.

Due to the injected gasket and if single-hole grommets are used, the KVT-ER provides certified protection ratings IP66/IP68 and UL type 12 & 4X*.

*4X for indoor use only

Leverbaar

Art.nr.

45452

Specificaties

Vlam klasse

UL94-V0, zelfdovend

Eigenschappen

halogeenvrij, zonder siliconen

Min. bedrijfstemperatuur

-40 C°

Max. bedrijfstemperatuur

110 C°

Voordelen

Beschermingsgraad IP66/IP68 (conform EN 60529)

Trekontlasting conform EN 62444

Garantie op voorgeconfectioneerde kabels blijft behouden

Ombouw, reparaties en onderhoud kan snel en eenvoudig

Hoge kabeldichtheid

Geschikt voor metrische uitsparingen

Zeskantige moer bij levering inbegrepen

Hoge stabiliteit, schokbestendig

Productbeschrijving

Bestel direct online @ CC Nederland »

Voor aanvragen uit België klik hier »

KVT-ER are split cable glands for routing and sealing cables with connectors, with diameters from 1 to 16 mm (KT 1 - 15) and 13 to 35 mm (KTG 13 - KT 34). But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery), sealed and strain relieved acc. to EN 62444.

The KVT-ER sizes are based on metric standard cut-outs M25, M32, M50 and M63. Hexagonal locknuts are included in the shipment. For assembly, we recommend to tighten the cover lid screws with max. 2 Nm.

Due to the injected gasket and if single-hole grommets are used, the KVT-ER provides certified protection ratings IP66/IP68 and UL type 12 & 4X*.