KEL-DPU-HD Hygienisk Kabelgenomföringsplatta multi-membran
robust, med stark dragavlastning, monteras på / IP66 / IP68
The new cable entry plates KEL-DPU-HD have been specially developed for installation in food processing and packaging machines. During the development according to the Hygienic Design guidelines, care was taken to ensure that the visible side of the cable entry plate are free of dirt-collecting recesses. The surface was kept very smooth (Ra = 0,421 μm acc. to ISO 4287). The outer contour has a radius of 6 mm instead of the required 3 mm. In addition, the KEL-DPU-HD uses an FDA-compliant elastomer in accordance with food approval 1935/2004/EG and (EU) 10/2011. The signal colour blue ensures a clear visual colour recognition.
KEL-DPU-HD entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66/IP68**. The KEL-DPU-HD is particularly characterised by its solid robust frame and the increased strain relief of the routed cables.
The KEL-DPU-HD 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors. The cable entry plate is mounted either by screwing it to the inside of the enclosure or by snapping it into the cut-out.
** IP66/IP68 only when screw mounted
ArtNr.
73940
Specifikationer
Brandklass
UL94-HB
Egenskaper
motståndskraftig mot olja och mögel, högre kemisk beständighet, halogenfri, silikonfri
Max. driftstemperatur
80 C°
Min. driftstemperatur
-40 C°
Edut ja hyödyt
Elastomer of the cable entry plate made of material according to 1935/2004/EG , (EU) 10/2011
FDA compliant
Developed according to hygienic design guidelines
Hygienic design – free of dirt-collecting recesses
Very flat design, very smooth surface (Ra = 0,421 μm acc. to ISO 4287)
Dual sealing of cables (IP66/IP68**)
High strength and stability
High strain relief
Fast and easy assembly
Very high cable density
Cable diameter 3.2 – 20.5 mm
Reproducible cleaning process
Very low moisture absorption
High resistance to aromatic solvents, oils, greases, mineral products
The new cable entry plates KEL-DPU-HD have been specially developed for installation in food processing and packaging machines. During the development according to the Hygienic Design guidelines, care was taken to ensure that the visible side of the cable entry plate are free of dirt-collecting recesses. The surface was kept very smooth (Ra = 0,421 μm acc. to ISO 4287). The outer contour has a radius of 6 mm instead of the required 3 mm. In addition, the KEL-DPU-HD uses an FDA-compliant elastomer in accordance with food approval 1935/2004/EG and (EU) 10/2011. The signal colour blue ensures a clear visual colour recognition.
KEL-DPU-HD entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66/IP68**. The KEL-DPU-HD is particularly characterised by its solid robust frame and the increased strain relief of the routed cables.
The KEL-DPU-HD 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors. The cable entry plate is mounted either by screwing it to the inside of the enclosure or by snapping it into the cut-out.
** IP66/IP68 only when screw mounted
Monteringsvideo
Monteringsvideo
Övertyga dig själv om den enkla och tidsbesparande
monteringen av våra produkter.
Kolla in monteringsvideon!
