KT CR | Slitsade kabelinsatser för renrum
för kabeldiametrar från 1 till 35 mm, IP66/IP68 / UL Type 12/4X*
Cable grommets KT CR small are used with the following cleanroom cable entry components:
In combination with KEL-ER CR cable entry frames the KT CR single-hole grommets enable a sealing of the cables with up to IP66 / IP68 and UL Type 4X*.
The model range KT CR small is designed for cable diameters from 1 to 17 mm. Cable grommets KT CR large accept a wide range of cable diameters from 16 to 35 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
*4X for indoor use only
ArtNr.
41214.600
Specifikationer
Brandklass
UL94-V0, självslocknande
Egenskaper
halogenfri, silikonfri
Min. driftstemperatur
-40 C°
Max. driftstemperatur
100 C°
Edut ja hyödyt
Gör genomföring av förkontakterade kablar via kabelgenomföring ramar och delade kabelgenomföringar
Finns för ett stort antal kabeldiametrar
Ökad packningstäthet vid användning av dubbla eller fyrdubbla genomföringar
Cable grommets KT CR small are used with the following cleanroom cable entry components:
In combination with KEL-ER CR cable entry frames the KT CR single-hole grommets enable a sealing of the cables with up to IP66 / IP68 and UL Type 4X*.
The model range KT CR small is designed for cable diameters from 1 to 17 mm. Cable grommets KT CR large accept a wide range of cable diameters from 16 to 35 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
*4X for indoor use only
