KT multi | KT special | Multi-Hole / Special Cable Grommets, Black
for Cable Diameters 1 - 8 mm and Special Cables / IP54
Cable grommets KT small are used with the following multi cable transit components:
Black KT grommets have an increased chemical resistance, e.g. against aggressive oils, coolants etc.
KT multi-hole and special grommets enable a sealing of the cables with IP54.
When using double or quadruple grommets the cable density of multi cable transit frames and cable glands can be greatly increased. The multi-hole model range KT small is designed for cable diameters from 1 to 8 mm. icotek also offers special cable grommets for e.g. ASI lines. ATG adapter grommets provide the possibility to hold a small KT grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
Part No.
39916
Specifications
Max. operating temperature
90 C°
Flame class
UL94-HB
Min. operating temperature
-30 C°
Properties
higher chemical resistance
Advantages and Benefits
Enable routing of pre-terminated cables through cable entry frames and split cable glands
High strain relief in accordance with EN 62444 when a suitable cable entry is selected
Available for a large range of cable diameters
Greatly increased cable density when using double or quadruple grommets
Cable grommets KT small are used with the following multi cable transit components:
Black KT grommets have an increased chemical resistance, e.g. against aggressive oils, coolants etc.
KT multi-hole and special grommets enable a sealing of the cables with IP54.
When using double or quadruple grommets the cable density of multi cable transit frames and cable glands can be greatly increased. The multi-hole model range KT small is designed for cable diameters from 1 to 8 mm. icotek also offers special cable grommets for e.g. ASI lines. ATG adapter grommets provide the possibility to hold a small KT grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
